Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Murray Hill
If your Murray Hill apartment has cold spots, a musty smell that comes back after every cleaning, or a supply register that pushes air into the wall instead of the room, the problem is usually a failed duct joint or a damaged run rather than dirt alone. We repair and seal ductwork in Murray Hill’s pre-war co-ops and mid-century high-rises, and we know what those buildings hide behind the plaster. Sealing a leaky riser or re-insulating a chase often fixes the dust faster than another round of scrubbing. Call (855) 952-0316 and describe what you’re seeing. We answer 24/7, and fast dispatch runs from 7am to 7pm.
Why Murray Hill Homeowners Call Air Duct Cleaning East Village for Duct Repair & Sealing
Most of the duct work we do in Murray Hill isn’t routine maintenance. It’s triggered by a renovation, a move-out, or a complaint from a neighbor about dust or odor in a shared chase. That’s a different job than sealing a suburban house. We plan around co-op access, we coordinate with supers and boards, and we bring equipment rated for the work.
Our technicians have up to 15 years of experience, and they carry Rotobrush and Nikro systems built for HVAC contractors, plus Abatement Technologies equipment for containment-level work when a chase needs negative pressure. We’re not arriving with a shop vacuum and a brush.
We know Murray Hill well enough to ask the right questions before we arrive. Is the run in a walk-up off Lexington or a full-service elevator building? Is the riser shared? Has the lining ever been touched? Answers change the plan. We serve Murray Hill regularly, along with the surrounding blocks, and we can usually reach you quickly because the neighborhood is right in our East Village home territory. One flat price per system is agreed before work starts, and the local pro we connect you with is licensed and insured as their state requires.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Murray Hill
We handle duct repair & sealing as a native service, so a leak found during a cleaning gets sealed in the same visit instead of referred out to a contractor you’d have to chase.
Duct Sealing
Sealing is often the real fix in a Murray Hill co-op. When joints separate at a riser, air carrying soot and renovation dust moves between apartments through the wall cavity. We seal those gaps so each unit’s supply and return actually serve its own rooms. In buildings where ducts pass through shared walls, we coordinate access before we start.

Flex Duct Repair
Crushed flex runs behind a new kitchen soffit are one of the most common finds after a Murray Hill renovation. The duct looks fine at the register, but the run is pinched flat and delivering almost nothing. We replace the damaged section and re-support it so it doesn’t collapse again under the next remodel.

Metal Duct Repair
Original sheet-metal trunk lines in 1910s and 1930s buildings are usually sound, but their seams and collars are not. We repair disconnected joints and failed collars with mastic rather than tape that dries out. On older metal, we inspect before we touch, because grit and loose lining can hide real damage.

Duct Insulation
Insulation in a pre-war chase breaks down over decades and leaves condensate and dust in its place. We re-insulate chases and runs that have lost their wrap, which matters in NYC’s humid summers and cold winters when systems run nearly year-round. New insulation also quiets a noisy return.
Trusted Brands We Service in Murray Hill
We work with systems built around Honeywell and Aprilaire components and service ductwork connected to equipment from Guardsman and similar whole-home air quality lines. If your building has an older air handler or a modern high-rise system, we bring the right tools for either. We don’t claim to stock parts on a truck, but we can get standard sealing materials and replacement run components quickly for most Murray Hill jobs. No subcontracting: diagnosis, cleaning, repair and any filter or humidifier upgrade are handled by the team you call.
Common Duct Repair & Sealing Problems We See in Murray Hill Homes
Murray Hill’s housing stock is dominated by pre-war walk-up and elevator apartment buildings from the 1910s through the 1930s, plus mid-century and modern high-rises. That mix produces a predictable set of problems.
- Original 1920s linings that fail under pressure. Many co-op units in 10016 still have original internal duct lining that crumbles under high-pressure brushing, so a routine clean can turn into a lining repair and reseal. We use low-abrasion agitation instead of aggressive scrubbing for exactly this reason.
- Crushed or disconnected runs behind renovation soffits. A supply register pushing air into a wall cavity instead of a room is usually a crushed flex run or a separated joint left behind by an earlier remodel. A camera inspection finds it in minutes.
- Shared risers that leak between apartments. Ducts that connect through shared walls and risers move dust from one unit into another. Sealing one unit’s joints doesn’t stop the cross-unit dust until the board coordinates access for both sides.
- Renovation dust and year-round run time. Murray Hill’s dense built environment traps construction debris from constant renovation work, and systems here run nearly year-round. That combination accelerates contamination inside the ductwork faster than in a house that gets a seasonal break.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Murray Hill, NY
Duct repair and sealing in Murray Hill is priced per job, not per vent, and the written estimate sets the final price. A typical duct sealing job on a single apartment system runs $450 to $1,200, depending on how many joints and riser connections need mastic and how much access coordination the building requires. A flex duct repair on one damaged run usually runs $250 to $600. Metal duct repair with collar and seam work typically runs $300 to $800. Re-insulating a chase or run runs $400 to $1,100 depending on length and how much old wrap has to come out. If a camera inspection turns up a brittle original lining, we explain what we found and quote the repair before we touch it. Estimates are free. Call (855) 952-0316 for yours.
We Also Serve Cities Near Murray Hill
Our work extends past Murray Hill into Kips Bay, Gramercy, Midtown and Chelsea, where the same pre-war construction and shared-riser problems show up block after block. If you’re just over the boundary and your building looks like the ones here, the diagnosis is usually the same. Call and tell us your cross streets.
Serving Murray Hill, NY – Our Local Coverage Area
We serve Murray Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Murray Hill
Yes, but not with high-pressure brushing. Original 1920s linings in Murray Hill co-ops are often brittle enough that aggressive brushing destroys them, so a trained technician drops the system to negative pressure with HEPA filtration and uses low-abrasion tools, then seals any joints opened up along the way. If the lining is already failing, repair and reseal come before cleaning. Call (855) 952-0316 for an exact quote – estimates are free.
Usually yes, if the work touches a shared riser, a chase that passes through common walls, or anything behind the unit’s interior finishes. Murray Hill boards typically want to know the scope and who’s doing the work, and shared-riser access affects more than one apartment, so permission has to come first. We can describe the scope in plain terms to help your board review it. Call and we’ll walk you through what your building will likely ask for.
Because the ducts are letting dust back in through separated joints, not because the cleaning failed. In pre-war Murray Hill buildings, disconnected riser joints and cracked mastic give soot and renovation dust a path straight back into the supply and return. Sealing those gaps is the real fix; cleaning alone just resets the clock. Call (855) 952-0316 and we’ll inspect the joints before recommending another cleaning.
You need a camera inspection, because the two look identical from the register. A crushed flex run behind a soffit and a dirty run both produce weak airflow at the vent. A camera in the duct shows which it is in minutes, and the difference matters: cleaning a crushed run won’t restore airflow, while replacing it will. Call and we’ll check before any work begins.
It can, because sealing closes the path that carries dust, soot and renovation debris from shared risers into your living space. In a building where ducts connect through shared walls, that pathway matters more than the cleanliness of your own run. Sealing doesn’t replace filtration, but it stops the constant recontamination that makes filtration work harder. If you’re considering a whole-home filter upgrade, Aprilaire and Honeywell systems are ones we install. Call (855) 952-0316 for a free estimate.
What Happens When You Call
Tell us the building, the floor, and whether the ducts are shared, and we’ll set up an inspection. Call (855) 952-0316. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. We seal what we find, in one visit, on one agreed price per system.
Written by the team at Air Duct Cleaning East Village.